Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Users are not able to share screen with apple tv or air server installed on the wireless network.
I have a 7510 WLC with 140 WLAN's, 130 of these are schools and they FlexConnect Local Switching. Each site has it's own SSID for private and public, t...
Users are not able to share screen with apple tv or air server installed on the wireless network.
I have a 7510 WLC with 140 WLAN's, 130 of these are schools and they FlexConnect Local Switching. Each site has it's own SSID for private and public, t...
Cisco FlexConnect 7510 won't boot to backup image. Yesterday I uploaded 8.1.102.0 to our master controller and restarted it when evertyhing was complete, the controller did not restart into 8.1.102.0 it is stuck on the screen that says "cisco bootloa...
I have Cisco 1040 model ap's and now Cisco 1600 ap models that I have up add an LWAPP entry to the dhcpd.conf file to allow the AP's to boot to the controller. Exisiting: option space LWAPP; option LWAPP.controller code 241 = array of ip-address;clas...
Flex 7500Software Version: 7.2.103.0I have a Flex 7500 with 200 1142AP's working fine in remote office and local setup. We have since purchased 3 OEAP 602's and looking to distribute to teleworkers. I have configured the OEAP to point to the NAT'd IP...
Bingo I see what I need here with one of the bottom lwapp line, this is exactly what I am looking for! Thanks so much for that!Sent from Cisco Technical Support iPhone App
Thanks Scott in some sites we have 155 sites that report back to the master controller and the server entry we do use some sites just use a simple DNs server that is Linux will have to figure out option 43! LolThanks for all your help ScottMSent from...
Thanks ScottAny suggestion what syntax I would use to have all ap's that boot go to one particular controller?ThanksMattSent from Cisco Technical Support iPhone App
