Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to send syslog messeges through a pix (515e 6.3) to pix(515e 6.3) vpn connection to a syslog server on the other side? What interface would serve in the logging statement? Thanks for any helpMarc Reiter (network hack)
Sorry for the simple question but I am a simple person.What is the minimum config for a pixI have an access-l outbound permit ip any any - on the inside interfaceand access-l inbound permit tcp any any eq 80 - for the outsidenat 1 0 0global (outsid...
My Vpn connects fine using RADIUS however I get a "no translation group found for 'prot' src outside 192.168.9.129 (vpn local pool) dst inside (inside address)" No matter what proticol is attempted.I read somewhere that you cannot setup a static if ...
Is it possible to block all downloads from any external web site, and still have web access for the users, and can it be configured using AAA? (how?)Thanks,Marc R.
I can see smtp data enter the pix 515e correctly (debug inside)however when it gets to the smtp server in the dmz the data field of the packet has changed to 2A(hex)'s (net monitor)Will the pix change a packets payload? Why? How to fix? The syn ack...
Oracle 8 uses dynamic ports in its connections. While it starts on (?1531?) it negotiatats a new port about every 6-20 packets. This will result in the above msg if you do not have all ports open.MarcNot an expert after 20 years.
it is in the 220 (per rfc 821) response that the server identification string is changed. this is the first communication from smtp acknowleging a connection.
