Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA 5520 with a remote access VPN setup via Anyconnect.I can connect to the VPN sucessfully and access devices on the internal network, such as RDP, without a problem. However I am unable to ping any device including machines I can make an...
I have a PIX 515E V7.0.4 and I'm having trouble with http access between the inside interface and a DMZ zone I have. I have a web server setup in the DMZ with an web interface to upload/download files. I can connect to this interf...
Is it possible on the PIX 515e to setup udp broadcast forwarding between specific interfaces. I see it's available for routers but can't find anything for the PIX. PIX v7.0(4)Thanks.
Hi Jouni,After I turned on ICMP inspection I did have partial success.A user connects to the VPN and gets a 7.0/24 address. Now that ICMP inspection is enabled this user can ping and make an RPC connection to any machine on the 1.0/24 network. This...
Hi Jouni,Thanks for the reply.I will check to see if ICMP inspection is enabled but will this morning. Would this be an issue only while connected to the VPN. Clients physically connecte to either or the LANS are able to ping between networks and a...
Same situation as far as getting approval. The DMZ is our portal for external users and customers. Taking this down, even only briefly, will take some time for me to schedule. Are you trying to rule the 3Com switch as the problem? I am planning ...
No, web traffic from the outside to the server in the DMZ is that same as from the inside net. Fast upload but slow download. Other traffic to this server, SMB, FTP, whether from the outside or inside works fine in both directions. It appears t...
Hi,I'm not sure if I am going to be able to do this. It's a production network and we are a 24/7 operation. For me to take the entire inside network offline will be something I will have to get scheduled and have management approve it. So if I ca...
