Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is the third time i have worked with Cisco Small Business routers and the device fails to properly Port Forward.Cisco RV130W will not Port Forward, Port Range Forward or Port Trigger at all. latest Firmware in place, 1.0.2.7CISCO: Fix or I repl...
Have a Catalyst 2960G-24TC-L, I am consoled into it and had VLAN1 configured with an IP. Used TFTP32 and from the switch used copy tftp flashEntered source file from the tftp and destination as the same name. Now I have a .tar file on flash, but am ...
we have a cisco asa5510 and I have firewall rules setup to allow all traffic incoming and outgoing from the pitney bowes device, I have forwarded ports required all except 443 as it is used by the SDM to access the firewall for management. Stil th...
So I have to chime in here, I know this post is 10 months old, but revisit this. Cisco WAS the best, but if your dealing with customers with 1 to 20,000 endpoints, mobile devices, SSL VPNS, Site-to-Site VPNs, your best bet is to utilize Sophos SG U...
Chris,
Run away from these units. Use Sophos or ANY other router. Cisco 800 series or 1900 series routers are a good cisco alternative, but more than you would normally want to spend if you are on a budget.
Poorly executed hardware. Currently we have a new in-house rule of never deploying Cisco Small business routing or security products. We actually use Sophos UTM Firewalls, they allow you to use their UTM for free in a virtual environment or on your...
So i have been on with Technical Support on Chat and Phone. They tell me this is a "known bug". I work for a reseller where this unit was installed at a clients location. They require these port forwards to work for their restaurant applications....
