Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloCan anyone help me understand if it is possible to have NAT pools that NAT Inside Local addresses to Inside Global addresses, plus static entries that NAT static Inside Local addresses to a static Inside Global addresses? I have a app server on ...
Hi Im having an issue with my 1242AG AP that i cant seem to find a solution for.I was working away configuring RADIUS and it decided to reboot itself, strange enough but then once it started to reload i got the following:Reset ethernet port 0...then ...
You will need a cisco rolled cable to use then plug into the console port of the router. Use something like terra term and then turn the router off then back on again to view the start up. You will need to send a break to the start up by pressing C...
Hi JonMany thanks for your replyI have been unable to do the change that you requested at the moment as this is a prod router and i cant get any down time.Ill have a change in for tonioght so i can give it a go then. Ill let you know once what the o...
Hi Jon192.168.0.0 - is our internal private addressing10.10.2.0 - is the customers addresses that we NAT to/behind.The customer then allows their address range 10.10.2.0 connections to their FTP/App servers which are192.110.100.74172.11.1.22192.110...
Here are the relevant parts, ive changed the IP addressing slightly for protection.ip nat pool APP-PROD-POOL 10.10.2.2 10.10.10.2 prefix-length 24ip nat pool APP1-PROD-POOL 10.10.2.11 10.10.2.27 prefix-length 24ip nat inside source route-map APP-PROD...
