About Steve Krantzman

Steve Krantzman · 05-11-2017

Just upgraded my 5505 to a new 5506. The network topography has not changed in any way and all objects, NATs and ACLs on the 5506 match exactly to those on the 5505. Everything is working as it should except that I can not scan to email from a Xerox ...

Steve Krantzman · 06-25-2013

I know this topic has been covered may times, but I am still stuck after reading many forum posts and cisco help files on the subject. Also let me say that I am not a Cisco professional in any way, although I do know my way around the CL to some exte...

Steve Krantzman · 06-13-2013

I have a production ASA 5505 that is working perfectly. I wanted to take a spare ASA 5505 and copy the running config to it so that I would have a backup unit that could be swapped out if the production unit went down. Both units have security plus a...

Steve Krantzman · 02-06-2020

I know this thread is older, but this solution may help others in the same situation.My ASA 5506 with FirePOWER was configured and running correctly for over two years. Then I was suddenly struck with this problem, and neither the ASA or my workstati...

Steve Krantzman · 05-25-2017

bump - anyone?

Steve Krantzman · 05-15-2017

AJ, I have tried both port 25 and 587 based on Microsoft's documentation on connecting an MFC to Office 365. The process fails using either port. I set up packet capture between the Xerox and the Office 365 mail server. Turns out the ASA is allowing ...

Steve Krantzman · 06-26-2013

Jouni,Thanks for the light bulb moment. Even if you have the destination interface of the Static NAT set to "any" it wouldnt mean that the traffic would actually take a turn on the "outside". It would simply go straight from "inside" to the "dmz". T...

Steve Krantzman · 06-26-2013

Harish,I am using the object network webserver from above in my outside ACL, so I believe it is already pointing to the real address.Jouni,Now regarding the "inside" to "dmz" traffic,I am not quite sure how you want the NAT between those interfaces t...

Member Since	‎06-13-2013 03:49 PM
Date Last Visited	‎02-07-2020 11:38 AM
Posts	10
Total Helpful Votes Received	5

User Statistics

User Activity

ASA 5506 Outbound SMTP over TLS failing

NAT for DMZ access from the inside network 8.3 and higher on ASA 5505

Trying to create a backup ASA 5505

Re: ASA 5506x no longer shows the "ASA FirePower..." tab under Configuraton

bump - anyone?

AJ,

NAT for DMZ access from the inside network 8.3 and higher on ASA

NAT for DMZ access from the inside network 8.3 and higher on ASA