Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, does anybody try OTV with HSRP in the same group between two sites ? (Active/Standby)from http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/DCI_1.html#wp1236403If I disable igmp snooping on 7k (OTV), solution on diag...
I want to use FCIP 10 Gbps. Does DS-X9708 Support FCIP ? or if you have another solution please tell me.lastly if I use DS-X9708 FCoE. How about the Distance Limitation.Thank you.
First Question about the FCoE Direct Attach If I have EMC Storage with FCoE interfaces and I want "FCoE Direct Attach" to FI-6248 "Without Upstream Switch" (MDS or N5K). Will it work ? if I "Enable Default Zoning" in UCS ManagerSecond Question about ...
UCSM 2.01q with 6120XPI can create port-profile using . (dot) for example "VLAN30-192.168.1" but it cause some warning message (picture below)so I try to change the name to VLAN30-192-168-1 it can work just finemy question is Can I use . (dot) in my ...
I have a problem with C210 M2 with 2 PCIe HBA. The problem is OS (RHEV) report with error log about the Problem with HBA card (Fibre Channel Traffic Disruption) cannot connect with FC StorageWhen I get the log from SEL.Time Severity ...
Robert,Thank you for your effort.but Do you have the plan to fix this issue in the future ? ( I want information to tell my customer )Best Regards,Attavit
Robert,I wait about an hour until warning fault become critical fault as the last screenshot I have sent to youWhile this issue happening I create the Port-Profile Client and push to vCenter. Yes, it appear in the vCenter but the problem is it cannot...
Hi Robert,Pls check private message for the capture screen step by step about creating the port-profile (VM-FEX)There's different from create port-profile name with - (hyphen) and . (period) from UCSM view from the picture in attached file1. Create P...
