Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two path for one network. I need to use PBR to route to a specific host using path A and other traffic use path B.access-list 101 permit ip any host 10.192.41.35route-map reroute10traffic permit 10match ip address 101set ip next-hop 192.168.10...
I have two issues. i am running two router using bgp on hotstandby. One router is the primary on one is the backup. the issue are,1) BGP is not passing the default route2) Getting BGP identifier wrongI would I appreciate any help.Here is the configu...
I need to know if I can have a user using Anyconnect client and others using the regular Cisco VPN client. Connecting to a Cisco ASA 5520. Let me know. Thanks Jose' Luis Granda
Jon, the network is MPLS for the primary path on a Ciso 3845. The secondary path is a site to site VPN on an ASA. The goal is to have all the traffic go thru the primay MPLS and only traffic going to a specific host 10.192.41.35 go over the vpn. All ...
Hello Giuseppe, Thanks for the quik response. Here is the router mapMain site for box unitsroute-map Swales permit 10 set community 13697114 13698023!route-map setpath permit 10 set community 13697094 13697114 13698023Let me know if you need anything...
Yes I am able to connect via https. But not aable to bing up anyconnect. On the ASA it show a clientless connection. Let em know if I need to do anything else.Thanks,Jose Luis Granda
