As already said, a multicast address shouled never be a source address so the Out ACL is wrong on its face.The In ACL should allow udp traffic to destinaton 239.10.10.1 and ports 1020-1030 into the router on vlan 10. Is that what you are trying to d...
On PE1 configure the multilink for bridging same as R2, then configure IRB with a BVI interface and put the address on the BVI.Here is a sample relevant configuration. I tried it out on three random routers and the three addresses can ping each othe...
Eugene Chumanov wrote:Gateway of last resort is 194.56.32.250 to network 0.0.0.0...C 192.168.1.0/22 is directly connected, FastEthernet8 <<<<< 192.168.1.0/32 is subnetted, 1 subnets.... 192.168.1.0/22 in the show ip route doesn't match the ...
dlandriscina wrote:ip route 10.107.67.10 255.255.255.255 <> That route is saying the destination 10.107.67.10 is reached via ISP1. I don't think that's correct. The server is in Vlan 1 I believe. You should remove that command. Once you've done tha...
