Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
CER_TELEPHONY | Cannot register media terminal for port : 7000000 This error is coming up over and over again in my Cisco Emergency Responder logs. The media port correlates back to CTI ports on call manager with the same identifier. So I went to CUC...
The digits are sent to CUCM for routing decisions before going to the gateway so to see exactly what was dialed and matched I would go with an RTMT trace and query the Calling Number which would be the DN assigned to the Fax Line.Open that up in Tran...
Sounds like you need to make sure the CD/DVD you are using stays away from the carbs for about a week or so. You could also try getting it in a super fast drive three times a day for a week to SKINNY it up SCCP style.
The partition they have on the CTI port wouldn't matter would it? CER would communicate to the Application user account which would then register up one of those ports to initiate the call to the destination number. Since nothing is calling the CTI p...
Did not mean to hit that correct answer button.. The CSS includes the partition of the destination number so all is good there. It would seem to me that at the point that CER tries to make the Onsite Alert call the CTI ports that are available and t...
Chris, Thanks for the input!! Onsite Alerting is not working as you pointed out. The CTI ports are using only G.711 and they are associated to my CER Application User as well. They all show registered in CUCM but after placing the 911 test call, at...