Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi NetPro,I'm having situation whereby my customer CE2 is running multihoming. Both links need to be up all the times. However, on site, which is CE3 connected to the same PE (PE3). Attach network diagram to ease reference.From CE3 going to CE2 of co...
Hi all,I've been receiving lots of the debug when doing sh log and keep popping every few seconds. How do I only disable this log message to stop appearing in the logging buffer ?Thanks in advance.maher
Hi NetPro,I'm new with MPLS TE. Upon reading, I'm trying to understand the different between the terms of configuring loose path and explicit path.Can anyone explain in simple term how to differentiate between this two terms?Thanks in advance.maher
Hi,I could not find in the feature navigation for 7200 platform that have mpls te frr. Does the services support on these platform?thanks in advance.maher
Hi there,I'm trying to understand how Inter-AS Option2a ASBR to ASBR, MP-eBGP using next-hop-self command.My findings as below. I noticed that if route-target is different from SP1 and SP2 the VPNv4 routes does not installed on respective vrf routes....
I tried to use different VRF on CE2-PE3 link with different RD and VRF but import/exporting same RT. So far so good Thanks for your input and suggestion!pe3#sh ip bgp vpn vrf vpn 192.168.2.1BGP routing table entry for 100:100:192.168.2.1/32, versio...
Hi Giuseppe,Thanks for the feedback. CE2 and CE3 have a leased line to PE3. There is no direct horizontal between CE2 and CE3.Yes. I have changed as per your suggestion and look OK so far pe3#sh ip route vrf vpn 192.168.2.1Routing entry for 192.168....
Oh sorry about that. It's a 7206 VXR.BTW, router(config)#no logging ? Hostname or A.B.C.D IP address of the logging host buffered Set buffered logging parameters cns-events Set CNS Event logging level console S...
Hi Harold,Glad to hear from you too. Cheers and thanks for the explanation. Maybe I could summarize it into implementation likefor configuring strict mode, all the next hop along the P routers, and as for loose mode, by configuring next-address loopb...
