Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, i have a problem with DHCP Server.we used Cisco WS-C4503-E with IOS cat4500-ipbasek9-mz.122-53.SG1.bin.for the existing DHCP server is running well.-------------ip dhcp pool ACB123 network 192.168.1.0 255.255.255.0 default-router 192.168....
Hi all,refer to my post before about diagnostic test fail : https://supportforums.cisco.com/thread/2223793and TAC already confirm bug for the ios ver 12.2(55)SE2 and suggest the new ios is 12.2(58)SE2experiment 1 : i try upgrade ios in first device W...
hi allwe have cisco wae-7371-k9 , we wanna recreate RAID device using cd recovery. we booting on cd, and when we done with option numbers 2,3,5 succes but when we came on option 7, we cannot recreate RAID, it failed, following the log:Installer Main ...
Dear All,sorry if i in wrong sub-forum.i wanna ask about diagnostic test to cisco WS-C2960S-48FPS-Li run this command for diagnostic test.switch#diagnostic start switch 1 test allthe output show:many switch i test diag and the result is fail for Test...
Dear All,anyone can help me.its a hardware problem or just not get power to module 1 for module WS-X6748-GE-TX?this is the capture from show module and sh log :------------------ show module ------------------Mod Ports Card Type ...
Dear Inayath and Yanuar,thanks for the info. So far, the network running well with this issue, but can someday this bug make our network problem(like make device fail/hardware fail or link down, etc)?Best Regards,Budi
Dear Inayath,is a Bug? i can't open link u post, i try new switch and the problem is same.new switch not connected to network.can u give me document to explain about this bug?Best Regards,Budi
Dear Leo,its a hardware problem?because untill now all switch with diagnostic test "TestPortAsicLoopback" failed is running well and no issue.all switch failed is running same like switch with passed diagnostic test.maybe anyone know the output "Erro...
