Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Folks,I have a old ISE appliance 3315, ISE application server is not running even after restart of ISE. ISE ver is 1.1.1.268 Not able to access this appliance through web also.Can anyone advise if I can upgarde this ISE directly to 1.2 through boo...
Hi folks,I need to configure VSS on cisco 4507R+E switch with SUP8-E,but the problem is that as per the latest relase notes VSS is not supported on sup8-E. http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_32143-01.htmlCa...
Hi, I have upgraded 4507R+E switch with the latest IOS release(ROM: 15.1(1r)SG4, ver 03.06.00.E release software) and it supports VSS. Another problem here is SSH is not supported. Any idea what can be done as this is the latest software release. T...
Hi Reza, The links coming from cpe1 and cpe2 can be bundled and made layer3 port channel on VSS swirtch?on VSS switch : 172.16.10.6/29 (port channel)cpe1: 172.16.10.2/29cpe2: 172.16.10.3/29HSRP virtual IP: 172.16.10.4/29Can you eloborate how I can us...
Thanks Leo,I better go with sup7-E. Btw, can you please give me a idea about layer 3 MEC on VSS switch. I need to connect VSS switch to two CPE routers running HSRP and I have /29 IP subnet for it. Can I create Layer 3 portchannel on VSS switch and...