Hi Your connectivity/setup is not clear however if your query is to configure backup data link you can follow the below link for details: http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/backup_ps9572_TSD_Pr...
Hi,Bgp deterministic-med command ensures the comparison of the MED variable when choosing routes advertised by different peers in the same autonomous system and bgp always-compare-med command ensures the comparison of the MED for paths from neighbors...
Hi,One more thing to add here, if you have connected your switch to your network or another switch and running VTP it would have learned the VLAN information from there and showing you 27 vlan with increased VTP revision number.Thanks & RegardsSande...
Hello Guys, Problem here is your config register or RP and SP not same and that is the reason you are getting mismtach error. Refer the below details that I have pasted in my first reply where I asked for the show version from both RP and SP."The pro...
Hi,Can you please share the output of the below commands:+ show version+ remote command switch show version+ show module+ show log+ show mls cef summary+ show mls cef max:::: The protocol allocation information is distributed from RP to DFCs and SP. ...