About David Duwe

David Duwe · 12-16-2015

MEZZ\obfl\syslog: Log completely full of hundreds of the following messages: 151214-07:02:16.294414 kernel: [2131724.390000] paloi2c paloi2c.0: target 0x70: split-transaction-stop error For every dozen or so of the above messages, one of the fol...

David Duwe · 01-15-2015

We recently purchased several B200-M3 blades with E5-2680v2 processors. Our UCS infrastructure and blade firmware is at 2.2(1d). ESXi hosts are at 5.5u1.From my reading of the Release Notes, this makes the new blades vulnerable to Caveat CSCuo30572...

David Duwe · 12-12-2013

I have received the following error code on one of our B200-M3 blades. There were no changes made to UCS about which I am aware. The LED on the front panel is green. I did not receive a "call home" notification. The error occurred several days ag...

David Duwe · 05-31-2013

Here's my persistent fault (Severity=Warning) in Fault Summary: Here's what I get when I click on the green triangle icon in the Fault Summary: I get nothing. So I can't address the fault.It shows up under the associated Service Profile as well...

David Duwe · 03-16-2016

Upon advice from TAC, I replaced the vNIC card (VIC 1240). This has resulted in syslog being free of split-transaction-stop errors for two days now. The VM load is normal. It appears we were dealing with a bad card all along.

David Duwe · 03-01-2016

Whoops. I spoke too soon. Upon further review, the load was not quite the same as before until the morning progressed and our XenApp VMs spun up to handle the business day. The split-transaction-stop errors returned. TAC is consulting with VIC t...

David Duwe · 02-29-2016

Good news. I am no longer seeing the syslog file full of split-transaction-stop errors. The steps taken were: 1)Update the CIMC of the blade from 2.2(5b) to 2.2(6e). This was supported by TAC even though the infrastructure remained at 2.2(5b). T...

David Duwe · 12-29-2015

Thank you for the prompt and helpful response. I haven't seen any discernable performance or functionality issues with this blade, so I agree that the Split Transaction messages are probably benign. The extra chat is somewhat problematic, however, i...

David Duwe · 12-16-2013

I plan to follow your advice and check the LSI utility to see if there is a disk failure being detected. I will schedule a server downtime for this as soon as possible and report the results here.Thanks again for the response. .... . . . . .. .. ...

Member Since	‎03-04-2013 01:34 PM
Date Last Visited	‎06-28-2018 02:16 AM
Posts	11
Total Helpful Votes Received	5

User Statistics

User Activity

UCS. Split-transaction-stop errors on B200-M3, VIC 1240, blade

Intel processor bug causes Windows 2008r2 guest to blue screen

Error code: F1237. SASO_FAULT

Fault shows in Fault Summary, but not in list of Faults

Upon advice from TAC, I

Whoops. I spoke to soon.

Good news. I am no longer

Thank you for the prompt and

Error code: F1237. SASO_FAULT