Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a cable circuit for a customer and a DSL conenction for failover.I have configured the router to track the default gateway and a DNS server out the primary via SLA ICMP reachability.I track the primary default route, which should be removed fr...
I have a customer with one particular site that is constantly complaining about performance. They have a 871 at the remote location with 4 IPsec tunnels built over to WAN connections back to their vendor that host the database and software. There are...
I have a customer with one particular site that is constantly complaining about performance. They have a 871 at the remote location with 4 IPsec tunnels built over to WAN connections back to their vendor that host the database and software. There are...
Hi all,We have a very large DMVPN network that uses certificates. At one of the spoke sites I generated a new crypto key. While the key was being created, I lost connection to the site. It appears that the DMVPN tunnel is down.I was not aware that a ...
Heres the deal. We have an ASA on each continent used just for the client AnyConnect connection.When I configure the "anyconnect image disk0:/anyconnect-win-3.1.05152-k9.pkg 1" command, I can connect.But when I configure the "anyconnect image ...
I have read that there is no way to set the metric of a default route received via PPPoE. Do you know if this is true?If so, then this is why I have both routes in my routing table. The primary route with the track statement is in the routing table b...
They are both default routes, 0.0.0.0 0.0.0.0. One for the backup, and one for the primary. The one thing that I am wondering about is the backup PPPoE connection. The IP address is set to 'ip address negotiated'. So would this automatically inject a...
Output form the local router:show crypto isakmp sa: MM_WAIT_MSG6show crypto ipsec sa: no outputThis is the output from the remote router: VPNKOPBR01#sho crypto isakmp sa | i xxx.xxx.233.10 VPNKOPBR01#ping vrf airsk-radixx ip 192.168.253.192 source lo...
I can already tell you what the output is.When pinging from the ASA to the router, show crypto isakmp sa outputs: MM_WAIT_MSG6 show crypto ipsec sa gives nothingWhen pinging from the router to the ASA, the tunnel builds like normal with no issues.I w...
