Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
please check the topology below attached, It is Carrier Supporting Carrier (CSC) lab.
i didn't start the customer side configuration, trying to fix the issue between CSR-9 and IOS-1.Both router exchanged their routes but they are not reachable...
Hello,I have issue with below topology, currently CSR router receiving routes from XR-4 using vpnv4 neigh, but CSR not sending routes to XR-4,XE-5#sh bgp vpnv4 un all neighbors 4.4.4.4 advertised-routeTotal number of prefixes 0XE-5#==================...
Good Morning,i have issue with below Topology, where R16 and R1 have each other routes but not reachable, the packet get drop from directly connected PE,Details :- XR4 (11.11.11.11/32) and R3 (8.8.8.8/32) both advertise their local PE loopback addres...
Hello,R8 and R16 are EIGRP neighbours VRF X.R3 and R8 vpnv4 neighbours.Inside core OSPF running on all Routers.Now R8 want to send the customer routes to R3, but R3 not receiving any routes from R8, but R8 has customer routes on VRF X table. now R8 w...
Thanks for take time to find out the problems, the issue is resolved by configuring static route under the
vrf on XRV-6 and XRV-4
i was wrongly configured the global one and the missing cmd
MPLS OAM on XRV-7 & XRV-3