Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have configured SIP trunk between CUBE CME2 10.5 and 3CX server.
CME1 - CME2 (CUBE) - 3CX server
When calling from from 3CX client to CME1 extension SIP INVITE message From header received by CME1 is:
From: "Name Surname x8990" <sip:Name%2...
Is it possible to configure system wide No answer timeout for SIP phones in CME.
telephony-service
timeouts ringing 15
seems to work only for SCCP phones.
Hi,
"Call forward noan" to non-local numbers is not working on 7821 SIP phones registered to CME. "Call forward all" configured on the same phone is working. If not answered call is forwarded to Cisco Unity Express :
dial-peer voice 199 voip destina...
Hi,
I have configured and registered transcoder which is needed for transcoding g711alaw (only codec supported by ITSP) to g711ulaw (IVR).
When IVR number is called ITSP sends INVITE with G.711 PCMA in in SDP part.
CME replies with OK message, G.711 ...
Hi,7821 SIP phones are registered to CME 10.5. When calling extensionvoip traffic goes through CME. How can I configure CME for traffic between phones to go directly? Thanks.
With TCL and VXML IVR scripts call forward noan was not working for both local and non-local
SIP forwards. Worked after handoff to default application:
handoff appl leg_incoming default "DESTINATION=$dest"
voice service voip
allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip no supplementary-service sip moved-temporarily no supplementary-service sip refer supplementary-service media-r...
