Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to run site surveys with a 1852i and a 1562E access point. What are my options on this, as they wont be connecting to a controller.
I have seen there is a software version for the 1562 that can run Mobility Express with a part number SWAP1560-...
Hi all,
I am seeing a weird issue on my 2504 WLC. I am trying to get traps to our management servers, but it appears that the controller only sends the down trap when the AP comes back up - almost like it's the AP sending the traps.
Surely this is no...
I have a new primary 2504 that is running 8.1.102.0, and an HA 2504 running 7.6.101.1. Question is, can I download the IOS from the primary 2504 to the HA controller? Does it matter if it's an HA controller?
Thanks
Hi there, Does anyone know if I can convert a 1310 AP currently on an Autonomous image, to LWAPP - I have a 2504 controller.The documentation I have read does not mention the 2500 series being able to support converted AP's. Just wanted to know if t...
Hi there,We run a very straighforward network with no QoS or anything implemented on it, but we are seeing a big difference in speeds - generally our download speed is good but the upload speed is bad - 80down/8up. This is between devices on our netw...
Hi Rasika,
I realise that, but the question was more around whether there is any different in the IOS versions between a fully licensed 2504 and a HA licensed version, I am assuming not, and it's just a licence thing, but want to confirm this.
Thanks...
Hi Leo,Sorry for delay - yes the other end is a Gb port on the MPBN, interestingly we are seeing the same issue in another country with the same types of devices. I am trying to get a fibre connection to see if that solved the problem. When we manual...
Have you tried disabling OKC (Opportunistic Key Caching) -I'm not sure what the Cisco term for it is, and seeif that works - I've seen similar problem on other networks, and although not ideal for roaming, at least you can connect.
Hi there,I have a 1242 working as a WGB on a non-Cisco WLAN. It is working with Aruba. You need to make sure you are running at least version 12.4 for it to work. From what I can see it is very limited - I can only get one client connecting to the Et...
