Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a cisco 3750G PoE switch. I am trying to connect the switch to cisco 881 router (it is the provider router). I am connecting it on the lan interface (switch module), but the problem that I am facing right now is that the port on the switc...
Hi Guys,I have a question regarding route-maps. Can we use a route-map without the set command.ip access-list extended Test_Traffic_To_Internet_1permit ip 10.195.50.0 0.0.255.255 10.195.0.0 0.0.255.255permit ip 10.195.54.0 0.0.255.255 10.195.0.0 0.0...
Hi Guys,I have two new 6509Es that I have connected to the network. The issue is that the two are connected via a port-channel and then the one 6509 is connected via a port channel to the main core switch (6509E). The problem is that the one con...
Hi,I am having this issue with the password management on the ASA. Everything on the ASA is configured according to the Cisco Document. Now the issue is that when I log in using the anyconnect client or using the webvpn, it does not prompt me that ...
Forgot to mention that on the cisco 881, we have one interface on the switch module that is connected to the switch and is up and running with the speed of 10; so that is the reason I did configure speed 10 on it. I even changed the config to speed ...
Rich & Paul,Thanks a lot for the responses, will be trying out the route-maps tomorrow and will let you know the results. But based on what Rich said and what I read in the cisco documentation, it seems that when doing PBR eventually you need to hav...
Hi Richard,But I thought that the permit instance in second instance will work if there is anything for the destination apart from 10.195.The scenario for this is that 10.195 is just the branch network and the 10.0.0.0 is the whole network, so anythi...
they are all connected via layer 2 with ospf as the main routing protocol. I have not enabled ospf on the new ones as I have not added the new cores to the firewall cluster, but I have a feeling that once I do add them to the firewall cluster as wel...
