Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to use http method for dee http://CiscoWorksServer:1741/campus/servlet/CMExportServlet payload.xml I can not figure out where the payload file goes. and how can I find the needed values for view, queryname,layoutname,queryphone,layoutphon...
RME: Device Selection will not display ALL DEVICES and will intermittently show from system, or MY Private viewsThis is getting progressively worse.Windows 2000 Platform.
I recently installed CD One 4th edition on a Wondows 2000 Server When I went to upgrade to CD One 5th edition it deleted most of the Ciscoworks modules When I installed the Campus Manager It did not reinstall ANI Server or Service for ANITopology, Us...
you will not be able to use 10.x.254.0/24 for loopback addresses. Keep 10.X.254.0 for the sc0 ip addressesdo not use 10.x.1.x 255.255.255.0 have no interface vlan1 defined for 10.x.1.0the switch will still use vlan1 for internal use.but use the 10.x....
If the vlan254 subnet is say 10.10.10.0 255.255.255.0your loopback addresses could be 10.10.20.1 255.255.255.255,10.10.20.2 255.255.255.255,10.10.20.3 255.255.255.255-10.10.20.254 255.255.255.255depending on routing confiogurations you may need stati...
nhabib you wrote "Make sure you install Service Pack 3 for Common Services 2.2 before trying the upgrade of LMS"Is this because of the server upgrade or is it required for the LMS upgrade from LMS 2.2 to LMS 2.5
Yes you have the right URL.I noticed the September 2004 when I use,http://www.cisco.com/public/sw-center/netmgmt/text/cwnews.txt with a browser.And I also see it in the ticker window.I just have not contacted tac to see if it is the current page yet....
