Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
Recently I came across this vulnerability on Cisco network switches of "Network Time Protocol (NTP) Mode 6 Scanner" which in description had "The remote NTP server responds to mode 6 queries. Devices that respond to these queries have the...
Hi All,
Recently I came across this vulnerability on Cisco network switches of "Network Time Protocol (NTP) Mode 6 Scanner" which in description had "The remote NTP server responds to mode 6 queries. Devices that respond to these queries have the po...
Hi Guys,I am facing packet drop issue on Cisco ASA 5520 after configuring its Gi0/0 & Gi0/1 = po1 and Gi0/2 & Gi0/3 = po2.Its not showing any packet drop on interface but showing drops in port-channel description.i have tried harcoded it but its sti...
Hi All,Please suggest what could be the issue i am unable to ping ironport management IP 192.168..42.42 from my laptop with same subnet i.e 192.168.42.50.i need to access this device but unable to do so.RegardsPankaj
Hi,I feel that the major change in the IOS was from 8.3(1) so i think you should upgrade from 8.2-->8.3(1) --> 8.3(2)--> 9.0Directly upgrading to 8.4 might give some bugs.about your problem kindly elaborate on this, what issue exactly are you facing?...
Hi Anand,Telnet on Outisde interface is not possible. you will have to configure VPN to do the same. Although you can configure SSH on outside interface. Cheers!!Pankaj Mark if this resolve your issue.
HI,Please follow below link to configure the same.http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/nat_rules.pdfCheers!!PankajPlease rate helpful answers which is better than saying "Thank You".
