Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I've configured RSTP in one of our branch divisions because we decided to add a backup wireless bridge in case one of our fibers gets cut out. Everything is working great , i am getting the desired result, however, i wanted to also syslog t...
Hi all,I have been tasked to find a solution to a problem we have in one of the sites we just bought.Here is the scenario:We have a C class network over there, for the sake of this conversation, it will be 192.168.1.0/24. The network only has L3 swit...
Hello All I currently am trying to do some QoS on our network, and came to realize that the MQC on the 3560's V2 only allows to match 3 criterias in class-maps ( Access group, input interface and ip).I've been following some training for certificatio...
Hi EveryoneI currently setup a remote site with a ASA5505, their outside int gets their ip dynamically. The site to site vpn works, however to have it in a cleaner setup, i would like to have the tunnel come up regardless of whatever dynamic ip my re...
I think i may have found the issue, however i cannot test in prod right now. snmp-server enable traps bridge topologychange should do the trick! I have enabled it,. and report back once i am able to test it
Here is the IOS i am using on the catalyst s222-ipservices_wan-mz.122-18.SXF14.bin Also here is all the logging settings for this Catalyst SNFCORE6509#sh running-config | i logginglogging event link-status defaultlogging history informationallogging...
I have the same exact setup on my lab network, my switches are syslogging to the same server, and i do get the trap message whenever the topology changes there. The only difference is im using a 3560 on my lab , and the prod is a 6509. The weird thi...
Hi Sarbjit-2014 Thank you for your response, i dont get any traps msg's at all, doing a sh log on the catalyst will not show me those events. Below is the output of my sh log ,for obvious reasons i have masked the logging hostSyslog logging: enabled...
