Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allMy system network is running ospf update route .we have some branchs, The branch have 2 line leadline connect to HQ ,a line with bandwith 2Mb and a line with bandwith 4Mbwe had config run loadbanlance with cost ospf the same on 2 lines.but when...
Hi allwe have switch 3560 , running interface vlan , and apply route-map on interfaces vlan . but traffic slowly between interface vlan . i try apply "ip route-cache policy " . but it not workinterface Vlan15ip address 10.0.113.33 255.255.255.224ip r...
Dear Dalethanks you replymy switch 3560 have many interface vlan:interface Vlan15 ip address 10.0.113.33 255.255.255.224 ip route-cache same-interface ip route-cache policy ip policy route-map proxy load-interval 30!interface Vlan16 ip address 10.0.1...
Hithanks for your reply my route-map:route-map proxy permit 10 match ip address Acl_Proxy set ip next-hop 172.18.32.74Extended IP access list Acl_Proxydeny ip any x.x.x.x (x.x.x.x network local)permit ip any any ( go to internet)SW3560-III#show s...
Hi i did do your mean :SW3560-III#show interfaces vlan 15Vlan15 is up, line protocol is up Hardware is EtherSVI, address is 001d.4500.374a (bia 001d.4500.374a) Internet address is 10.0.113.33/27 MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, ...
