Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
If I wanted to change the IP Address of my ASA how would I configure the switchport that it connects to? Right now the port is configured :interface GigabitEthernet0/24 description **Cisco ASA** switchport access vlan 10 switchport trunk encapsulatio...
Hello all,I have a setup of a ASA 5550 connecting to a Cisco 3560 where the port on the ASA is configured to 192.168.1.2 255.255.255.0 and the port on the 3560 is configured as : interface GigabitEthernet0/23description **Cisco ASA**switchport ...
Hello all.Right now everything works fine. The goal I am trying to accomplish is changing our ASA's IP Address from a 192.168.1.* to a 10.10.0.* address.My issue seems to be the config of the Cisco Switch that the ASA connects to. Right now the port ...
We have the Cisco Unified Call Manager 8.5 and Cisco Emergency Responder 8.5 in place at where I work, and the E911 service works great. My question is, is it possible to add another 3 digit emergency number only for internal use in addition to the 9...
Here is the config on ports. Port Gi0/23 is going to the ASA, and Port Gi1/1 is going to our HP chasis switch which is where all the other switches connect to.interface GigabitEthernet0/1 description *** User with IP Phone and PC *** switchport acces...
interface Vlan10 ip address 10.10.0.1 255.255.0.0 ip helper-address 10.10.X.X ip helper-address 192.X.X.X ip pim sparse-dense-modeend------------------------------------------------Vlan10 is up, line protocol is up Internet address is 10.10.0.1/16 ...
Our network as it is right now is as follows.ASA-192.168.1.2Cisco Core Switch - 192.168.1.1The port that the ASA is plugged into on the Cisco Core Switch isinterface GigabitEthernet0/*description **Cisco ASA**switchport access vlan 10switchport trunk...
