Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Working on some better documentation, but for quick and dirty. Here are the files in the zip file when you download CSM Server 3.3
Also check out the Youtube video for Introduction to CSM
https://www.youtube.com/watch?v=isxN08x-mr4&feature=youtu.be
...
FPD 101 for the ASR9kBasics about FPDsUpgrading FPDs FPD 101 for the ASR9kThe purpose of this document is to give guidance and explain how the FPD process works for the ASR9k platform. Basics about FPDsField-programmable devices (FPDs) are hardware ...
FPD 101 for the ASR9kBasics about FPDsParallel UpgradeTo reload or not to reload?Upgrading FPDs FPD 101 for the ASR9kThe purpose of this document is to give guidance and explain how the FPD process works for the ASR9k platform. Basics about FPDsBack...
Useful information when dealing with XR Service Packs (SPs)PurposeSMUs on top of Service PacksCurrent Exceptions with SMUs on SPsWays to improve on the current exceptionsService Pack Frequently Asked QuestionsUseful information when dealing with XR S...
Asking all our customers. Looking for some other examples where we had an issues on the a9k where we might have some gap in system resiliency. Looking for issues where we might have seen a HW or SW issue and the router didn't handle it in a way yo...
I believe you are confusing CSM server with the old java client. CSM server is much more than what the old java app. CSM server can be loaded with all your XR devices via quick file with all your device IPs. No need to manual enter them all 1 by 1...
BNG aside, PWHE didn't work for untagged. This was added with CSCuy79552 - Feature enhancement for untagged traffic L2 PWHE. It's integrated in 611, 602 and 534.
That's correct. Unfortunately most FPDs require a reload for the newer version to take affect. smailmilak does mention a good way to limit the impact if you don't want to reload the entire router again.
As mentioned in the first part of the doc ...
So usually in most MPLS core networks, you only need a label for the PE addresses. For this we usually recommend using host-route only for label allocation. This would greatly minimize the label allocation.
mpls ldplabel allocate for host-routes...
Mark is correct here. On the "root" you would add "split-horizon" under all your leafs. This will put all the leafs in the same split-horizon group and prevent anything coming from a leaf to get sent to any other leaf. But the root can send to all...
