About lassebjoern

lassebjoern · 01-11-2012

Hi,I'm having trouble syncing the config archive for some of my nodes.I get the error 'partially successful' (see attatched PNG).I've looked in the dcmaservice.log (also attatched), and I can see the extended error message:[ Wed Jan 11 09:49:30 CET ...

lassebjoern · 10-28-2011

In my LMS 4.0.1 on wondows installation, the backup job fails with:"[Fri Oct 28 11:19:10 2011] ERROR(1297): Fatal error: Database engine 'ipmEng' could not be started on database 'ipm' in Bulk mode.."I have also tried running the backup manually wit...

lassebjoern · 02-15-2010

Hi Guys,This morning I upgraded a failover-set of ASA-5520's from 8.2(1.11) to 8.2(2), by loading the new software onto flash on both devices, setting the boot parameter and reloading the standby-unit to 8.2(2).The secondary unit boots 8.2(2), and I ...

lassebjoern · 06-14-2007

Hi,My monitoring-platform is seeing a lot of ifInDiscards on a couple of interfaces on one of our ASAs ver 7.1(2), which I can verify with:snmpwalk -v2c -c ******* [IP] 1.3.6.1.2.1.2.2.1.13IF-MIB::ifInDiscards.1 = Counter32: 0IF-MIB::ifInDiscards.2 =...

lassebjoern · 03-14-2013

Rob Johnson wrote:Is the repository defined local or remote?Run the show repository to make sure the repo can be seen from the CLI.Remember, if the repo is local like in disk:/defaultRepo, a directory has to be created on the appliance using the mkd...

lassebjoern · 03-13-2013

Hi,I'm seing the exact same issue. I first noticed it on PI 1.2, but the issue is still present after I upgraded to 1.3.The interesting thing is, that some images manage to download correctly, but not all...maybe it's a filesize-issue.

lassebjoern · 08-29-2012

Yesterday i tried upgrading to 4.2.2, but my backup still failed this morning with the "some files are being accessed by jobs".I will try to disable/enable the backup job to see if that will make a difference..Sent from Cisco Technical Support iPhone...

lassebjoern · 08-27-2012

I see exactly the same issue in 4.2.1I think we have to wait for Cisco to fix the bug - Hopefully, the solution will be an automatic solving of conflicts, making the manual planning of jobs redundant...

lassebjoern · 07-13-2012

Hi - I'm seing the same issue on 5.3 - Did you ever resolve this?

Member Since	‎06-10-2007 08:13 AM
Date Last Visited	‎10-09-2017 12:48 PM
Posts	20

User Statistics

User Activity

LMS 4.1 sync archive 'partially successful' on some devices

LMS 4.0.1 Backup fails

ASA: Upgrading from 8.2(1.11) to 8.2(2) presents failover problem

IF-MIB::ifInDiscards on ASA 5520

prime infrastructure: image download fails at copying imae to re

prime infrastructure: image download fails at copying imae to re

Re: LMS 4.2 Backup Failing Randomly

LMS 4.2 Backup Failing Randomly

Unable to make backup in ACS5.1