I have checked and you cannot do this from the CLI however you can perform this from Ciscoworks 2000.I have considered using this facility myself.Within Ciscoworks you have a feature called "NetConfig". You can schedule any kind of config change.Do...
You sometimes can have two subnets on one interface but you can only have one VLAN per interface.What kind of routers are you using? I would suggest keeping it simple, keeping your routers in each building and replace your router connecting the othe...
No this shouldnt be the case, but from your info above you have issued the commandsh int fa0/10 and shown us and fa0/9 is up/down?you're not running spanning tree on these ports are you? it should be up up even when you have a sniffer attached.emai...
What we have done in the past is that we use the first available host address in a subnet as the router IP address. Might that help?Guess it doesnt stop anyone without knowledge from taking that address in the end.If you are on a corporate LAN why n...
To create additional network segments on a switch you can create VLANS (virtual LANS) people usually group VLANS by order of use. For example a purchasing dept may use one VLAN and the HR dept might use another. For each of these VLANS to communica...
