Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have a Firepower 2130 running 6.3 FTD with FDM. Is there anyway this FDM platform can support 2FA with RSA SecurID via the token just like switches upon webUI for administrator logins?
Hello,I have a requirement which is quite strange. I have 3 laptops (each laptop is connected to VLAN 10, VLAN 20 and VLAN 30 respectively), connected to a layer 2 switch. The gateways are 192.168.10.2 for laptop 1 from VLAN 10, 192.168.20.2 for lapt...
Hi experts, we have a requirement to setup an IPSec VPN tunnel. The requirements are:
1. The Certificates used are a "copy & paste" certificates from a CA. There is no CA available and reachable from either routers.
2. All certificates (Root, Interme...
Hello,
my network topology is such that I have an internet facing routers (2 HSRP routers) and behind the router is an ASA towards my internal network. However, each router is connected to a different ISP for redundancy purpose and my firewall has a ...
Hello,
my environment has perform a vulnerability scan on my IOS and Cisco software appliances. And the results of each vulnerability is as attached. The main equipment list are:
1. Cisco C3650 24 port switch
2. Cisco C6807XL
3. Cisco ISE 1.2
4. Cisc...
Hi @Richard Burts , thank you. We hope to use routed ports on the links between the switches. With this in mind, do you have any idea how to configure the VRF to use the routed links on the global switch? Is there routing leak involved?
Hi @Richard Burts & @Jon Marshall , I have to re-visit this as this came to haunt me again. I have a task to exhaust all options before scrapping this idea completely.Let me repaint the context of this requirement:1. As seen in the picture (sample.jp...
Hi Marvin, I'm assisting Peter with this deployment and thank you for your kind help this far. We are clear on the Ospf template but not so clear on the interface ospf settings part. Usually we would use the Ospf template globally and all interfaces...
Hi Rick,the requirements that are passed to us are:1. 2 active standalone (not A/S) firewalls to perform inter-VLAN routing, if 1 goes down, the other firewall can take over the routing.2. The 2 core switches (L2/L3) are configured with HSRP.3. All s...
