Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I'm in the process of migrating my solution from SPA2102 ATAs to SPA112s. There are a couple of issues where the SPA112 seems to be "flakey" compared with the 2102, but I'm looking for guidance/help in one particular area.We have a customised...
HiI have a brand new SRP521W that has a 3G wireless USB modem connected to it.It has an asterisk system on the "inside", and port 1 of the FXS is configured as an extensionto the asterisk. Port 2 of the FXS is configured as an extension to an intern...
greetings.We have three 1232AG APs configured as two root bridges and a mobile work group bridge, designed to give coverage to the work group bridge as it moves across the campus.We are experiencing the situation where the workgroup bridge is relucta...
Hi againWe have a pair of 1232 APs configured as root bridges, and a single 1232 as a workgroup bridge configured as mobile.What happens is the root bridges come up OK, and when we power on the WGB, it connects to one or the other of the of the two r...
Hi,When we do a show assoc etc on a 1232 AP,we get figures back showing signal strength in the region of 70 and signal quality around 35.What is the reference for these figures?Is it 70 as in 0 bad 100 good, or is it 70db, where 60 is a stronger sign...
I still haven't managed to get the latest firmware, either through TAC as a warranty call or via the support package,but I have an update.The FXS ports don't shut down, they loose their registration to the asterisk server!When the GSM/WAN port discon...
Thanks for all that.I'm aware of what all the acronyms are, etc. What I'm trying to find out is what these numbers are supposed to represent on this piece of equipment. The Cisco documentation is NOT helpful, and the outputs from the commands are no...
Thanks allFirmware is 12 3 8 ja2 on all three APs.The WGB is getting hot in its current location, so we will add a bit more ventilation and see if it changes things.When the set up was bench tested before installing, it ran for hours (days) without p...
