About Kremena Ivanova

Kremena Ivanova · 06-29-2015

You have to specify which ping is not successful:-if ping to the remote gateway is not successful this could mean that the tunnel is not established at all, though it shows the opposite. It could be PFS mismatch. Or ESP filtered packets by the device...

Kremena Ivanova · 06-22-2015

Hi David, You cannot disable the wifi by shcedule, only manually from the web interface, but there is Schedule Management for Firewall rules. What you can do is to forbidden access form LAN to WAN, using schedule. Users will still be able to connect ...

Kremena Ivanova · 02-23-2015

Hi, I followed your steps but port forwarding keeps working for me. Can you, please share the config file? Regards,Kremena

Kremena Ivanova · 02-23-2015

Hi, You can try to recover the firmware. from cisco.com. Download the firmware that you have present on the device. If you didn't notice the firmware version, download the latest firmware. You may find the procedure in the end of the release notes. I...

Kremena Ivanova · 02-12-2015

Hi,I see that you've opened a ticket with the Support for this, so I will provide the answer for the audience. In order not to see this message, network service detection on both WAN1 and WAN2 should be checked. There is no NSD for the USB port. I se...

Member Since	‎09-05-2011 11:54 PM
Date Last Visited	‎09-25-2023 10:57 AM
Posts	141
Total Helpful Votes Received	38

User Statistics

User Activity

You have to specify which

Hi David, You cannot disable

Hi, I followed your steps but

Hi, You can try to recover

Hi,I see that you've opened a