Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,
Meraki has a wifi billing solution where we can charge per-user on the basis of bandwidth consumed. Do we have any such solution where we can integration WLC5500/ ISE for enterprise network that can be integrated with billing solution.
Re...
Bin, it is only required if u have management traffic directed towards interface over the vpn tunnel.Regards,Sim.Please mark resolved questions as "Answered"Sent from Cisco Technical Support Android App
For testing remove the last line of the split acl 110 that say permit ip any.....Once removed connect the client and test againSent from Cisco Technical Support Android App
Interesting. Enable the following debugs on the router:debug cry isadebug cry ipsecAlso enable logging on the vpn client at level 3Once debugs and logs r enable, connect the client and upload the info here.Sent from Cisco Technical Support Android Ap...
Assuming that u have the vpn config in place, pls ensure that you have the following configured in the config mode on asa30man insideWhere "inside" is the name of the interface u r trying to ping.Sent from Cisco Technical Support Android App
