Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI captured some TCP comunication because there is a issue with long respons of some application.I see in some TCP packets using Wireshark:window size value:593{Calculated window size: 151808}{Window size scaling factor: 256}Can this values indicate...
HiI captured some TCP comunication because there is a issue with long respons of some application.I see in some TCP packets using Wireshark:window size value:593{Calculated window size: 151808}{Window size scaling factor: 256}Can this values indicate...
HiI upgraded failover pair of ACE30 modules.There is this steps in UPGRADE GUIDE Step 8 Configure ACE-1 to autoboot from the latest ACE image. To set the boot variable and configuration register to1 (perform auto boot and use startup-config file), us...
Hi I captured attempt (telnet 10.197.10.19 8888) from 10.123.14.24 of connection on outside interface of ASA2 packets captured 1: 13:35:59.051358 10.123.14.24.37199 > 10.197.10.19.8888: S 920768158:920768158(0) win 49640 <mss 1380,nop,wscale 0,nop...
Hi,I have failover pair of ASA boxes without configuration of stateful failover. There is only basic LAN failover.I want to add stateful failover configuration using dedicated interface of ASA. Is this with downtime zero when I will add command for s...
acedc3-01/Admin# sh ft group briefFT Group ID: 1 My State:FSM_FT_STATE_ACTIVE Peer State:FSM_FT_STATE_STANDBY_HOT Context Name: ssl-dc3-acc Context Id: 1 Running Cfg Sync Status:Running configuration sync has c...
I turned off logging Build message and now I see Teardown of my attemptIt looks that there was a lot of messages and not all was send form ASA. maybe.So now I see Teardown TCP connection 687760866 for dci:10.197.10.19/8888 to inside:10.123.14.24/526...
I check level logging, I fixed it, now is OK, there is a lot of diferent Build.. and Teardown.. messages in syslog so I did attemptBut I see only Bulit... message, no Teradown of my attempt. And after attempt I immediatlly checked show connection on ...
