Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I have a question regarding AAA override when using 802.1X and anchor WLCs. We have a BYOD network where our Campus WLC are using a WLAN with 802.1X for AKM and no L3 security. Following successful authentication traffic is tunneled to the DM...
Hi,We are trying to investigate ways of blocking torrent traffic on our WLANs and currently testing the AVC feature on a pair of 5500 WLCs running 7.4.100.WLAN traffic is anchored from a "Campus" WLC to a "DMZ" WLC. An AVC profile was created on each...
Hi all,We are planning to conduct RF site surveys on 10 sites in the UK to deliver a high density WiFi network (including Voice services) supporting about 20 users per AP radio. We will use 3602i APs for those networks and the same AP model will be ...
Hi all,There is a requirement to provide Airplay services on our wireless network across a 30 floor building.Apple TVs will be installed on 2-3 presentation rooms on each floor.The users will have to use our existing BYOD network and Apple TVs to mir...
Hi all,We are using NCS 1.2 to monitor and manage our WLCs. We are also using different Virtual Domains per region.On our network we are using Campus WLCs that anchor their traffic to Anchor WLCs behind a DMZ.When we add a Campus WLC to NCS and try...
Hi,Is bittorrent the only protocol that is used for p2p torrent file sharing? Do you believe it is worth blocking traffic upstream using another device (FW, IPS etc) in order to offload the WLC?Unfortunately for the time being we can only use 7.4.100...
In the case of the iPhone, 25mW would be ok on the AP side for the 2,4GHz.This device is using 13mW on the 5GHz.Does this mean that we will have mis matched power settings between the AP and the device which will cause the device to be able to hear ...
But if we select 25mW for the AP TxPower and we are using an internal antenna gain of 3dbi, EIRP will be 50mW.The survey results will be completely different.If we go with 25mW Txpower, should we use TxPower Level 2: 14dbm =25mW for both bands?
Do we consider the 25mW as the radio transmit power or EIRP?In the example above, should we select L3 with 20mW EIRP for the 2.4Ghz and L4 with 16mW EIRP for 5GHz?
Hi Scott,We are using a big subnet on the Anchor WLCs for the BYOD WLAN. Unfortunately, we can't differenciate if a user is on the 1st or 20th floor or use AP Groups with different VLANs per floor, because traffic is anchored.Is there any way we can...
