Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello! Im having some issues with a trunk that originates from an WS-C2960G-8TC-L to an CISCO1921/K9. The native VLAN seems to work fine but the other VLANs on the trunk cant be reached. I have created a VLAN interface on the 2960 with an IP address ...
Hello!I would like to retrive some specific reports from the NCS regarding load threshold violation on some specific 1142N accesspoints. Using the alarm browser don´t help me that much because you cant see the history of how many alarms each AP has g...
Thank you Mike! It solved the problem. I thought that the router processed the trafic from the 0/0 to 0/1 interface but now i learned that it didnt. Im not so good in routing but now i know more about subinterfaces and trunking on a router. Its a kin...
So i should also have subinterface´s at the "outside" of the router to make this work? All the vlans have interfaces on the gig0/1 interface witch is on the inside. I shall try this and report back to you.Thanx!
The speed is set to auto by default on the router. Here is the outgoing port on the router: GigabitEthernet0/0 is up, line protocol is up Hardware is CN Gigabit Ethernet, address is ccef.4847.7b80 (bia ccef.4847.7b80) Description: WAN Internet add...
Thanks for the reply!The rest of the vlans is not suposed to be members of the trunk. Added them tough but it makes no differens. Our workstations is on the 2000 vlan but even when i trying to ping the vlan interface on the switch from the router it ...
