Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am having a dilema when it comes to replace the 2 cisco 3750 switches in the datacenter. They have links to Nexus 5000, where the servers and storage are connected, act as main L3 devices, where MPLS traffic from branches also comes and where th...
Hi,I have a site-to-site VPN between ASA (main site) and a Cisco 861W ISR (branch) that works fine; the only issue I have is when I want to backup the configuration of the ISR using tftp on a station in the main site, I can't because the ISR tries to...
Hi,We have a Cisco 3750G stack and the WAN interface running at 1Gbps shows dropped packets; I am monitoring the BW, and it rarely seems to exceed 80%; is this oversubscribed, based on the output:GigabitEthernet1/0/3 is up, line protocol is up (conne...
Hi, I have a mainetance winodw coming and I want to upgrade the IOS on a few Cisco 3650, 3750, and 2960 switches, but I am undecided in regard to the version of IOS. Does anybody has experience with the 15.0 version? It is a good idea to jump to 15...
Hi,In regards to split tunnel, I am also having a dilema on how to configure the policy, so the local LAN access is permitted, while all other traffic, corporate and Internet, still goes through the tunnel.Reading about it, I found this:"In a remote ...
We don't have QoS enabled on the switch; but the ISP has QoS enabled within the MPLS network.It is interesting that a while ago I called TAC, and the guy run the interface stats once and he gave the resolution: oversubscribed. He said that for 1GB l...
The WAN speed is 1Gbps for this site (it is the data center). the traffic from all the remote sites (at different speeds - 10Mbps and 100 Mbps) are coming through MPLS to the datacenter on this link.There is QoS applied through MPLS on ISP's devices...
