Selecting "Host Mapping" freezes the web interface.Actually it totally kills the web interface and the switch will no longer respond web requests.(IP Configuration - Domain Name System - Host Mapping)Have to power cycle reboot to recover.Model: SG 20...

For Example:     Non broadcast ARP requests ARE seen on mirror.     ARP replies ARE seen on mirror.     Broadcast ARP requests however are NOT seen on mirror.Same with other broadcasts. They are NOT seen on mirror.Model: SG200-08Firmware Version: 1.0...

https://supportforums.cisco.com/message/3928450#3928450Update this SF100D-16 to SG200 and SG300 series and you have a winner.http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=2424188&cpncode=35-5641379&site=cp

Model: SG200-08Config:Port 1 - 5 VLAN 1 UnTagged Member, VPID 1 (defult config)Port 6 - VLAN 99 Tagged Member, VLAN 1 Untagged Member, VPID 1 (default)Port 7 - VLAN 99 UnTagged Member, VPID 99Port 8 - VLAN 99 UnTagged Member, VPID 99Port 8 Tx & RX Mi...

Cannot get the SG200-8 to mirror any traffic other than ping (icmp).Factory default settings, with port 7 src to port 1 dst on session 1.Pings mirror just fine.  But other traffic. such as web and ssh, is not being mirrored.FW version 1.0.2.0