Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Firesight Management Center (VMware) 6.0.1 which was upgraded from 5.4 with classic licenses and worked without issues.Now the licenses shows up as "Failed [ node ]" :
Went through the process of converting them to smart entitlements and assigned t...
Having issues with setting up LAG on a Cisco 2504 WLC and implementing VLAN tagging on the different SSID´s.Without LAG I had this up and running by using dynamic interfaces and assigning the different SSID´s to a perticular interface which was then ...
That makes alot of sense, so would this issue be resolved by updating the ASA code to the FTD image? What puzzles me is that I would assume the licenses would show up in the FMC regardless of what image the ASA is running.
I just did a conversion of my "classic" FS-VMW-2-SW-K9 to the new "smart" system.But I do find it strange that the licenses show up in the "smart" system but are not available on the device.
Hi Scott,Yes I did.. But it seems that after deselecting the "Interface/Interface Group(G)" under the SSID´s and then selecting the dynamic interface again that the problem is resolved.