We are putting a Cisco 2611 in front of ASA 5510 to accept a DS3 circuit.  After circuit activation, 2611 can get out to Internet, but both internal user and ASA cannot access Internet.The design is as followingInternal user <-> ASA e0/1ASA e0/0 <-> ...

I am trying to create access-list or access-group which matches following on Cisco 3750 switch.SRC: 192.168.0.10, 192.168.0.11, 192.168.0.12DST: not equal to 192.168.0.0/24andSRC: not equal to 192.168.0.0/24DST: 192.168.0.10, 192.168.0.11, 192.168.0....