About FRANCESCO TAMBURRINO

FRANCESCO TAMBURRINO · 03-21-2017

Hi guys, I've this scenario: Lync 2013 (standalone - only Mediations server) <---- SIP TRUNK ----> CUBE (ISR 4400) <----SIP TRUNK ---> CUCM 11.5 - On Lync I use Skipe Bus. client - DN:14xx, - On CUCM I use Cisco 7821 - DN - 13xx - Cisco CUBE has...

FRANCESCO TAMBURRINO · 08-04-2017

Hi guys,two questions about UCSPE:1) It's available NXOS shell? Issue:ucspe# connect nxos sh: /isan/bin/vsh: No such file or directory2) It's possible to integrate UCSPE with NXOS emulator (in Virl Nexus 7000 device)?Best regards

FRANCESCO TAMBURRINO · 03-26-2017

Hi Mohammed, sorry for delay. I check windows firewall status on Mediation server but all is stopped... You know about Lync configuration with Edge? I see that there is a Edge server but I don't understand - on Mediation - when call flow transits thr...

FRANCESCO TAMBURRINO · 03-23-2017

Hi Mohammed, thank you for response!!! So, when I call PSTN from CUCM IP Phone works: it's used same POTS dial-peer. The great problem is that I'm not ROOT user on LYNC and so there is a limitated access to Debug tool (OCS Log Analyzer and Snooper). ...

Member Since	‎08-06-2013 04:19 AM
Date Last Visited	‎01-20-2021 01:26 AM
Posts	3

User Statistics

User Activity

Lync and CUBE Sip trunk - PSTN calls disconnection

Re: Cisco UCS Platform Emulator 3.1(2ePE1)

Hi Mohammed, sorry for delay.

Hi Mohammed, thank you for