Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to lab a Core, Distribution, Access lab design. In short, the core is a 2811 router and my distribution is a 3560 as is my access switch.
I setup BGP between the core switch and distribution, and when I connect a host to the distribution...
I was browsing the INE CCIE Data Center courses and came across the sample video under storage. The topic is SAN Port Channels. My question is in the diagram, they show 2 JBODs, connected below it are 2 MDS switches, and below that connected to 2 Ne...
Can you test HSRP using a loopback interface? Is that possible? I'm trying to test our HSRP setup before we connect it to prod, so I have the IP's that it will use setup. But wanted to see the HSRP in action before deploying.
I fired up an old 2522 Frame Relay router for one of my labs. For whatever reason, it's now booting into the prompt router(boot). What exactly causes this issue? Did the IOS somehow become corrupt? I've verified that the config-register is set to...
I'm reading up on switching in regards to the CAM and TCAM. I came across a statement stating, "TCAM is most useful for building tables searching for searching on longest matches such as IP routing tables organized by IP prefixes." When they say 'se...
Thank you guys!! Seriously thank you very much! That's what I needed and I got it working. I understand the process and what is needed. I appreciate it! Now on to do the other side and get high availability running.
I know the N5K can be used, but my question is why this design with MDS and N5K? Here is the design topology from INE lecture video that I'm referring too.
Thanks guys, I appreciate the responses!! I know it sounds like a simple stupid question, but this is my first time implementing HSRP in production. I've done it in the lab, but in prod it's a whole different story as you throw in 'worry' now. Chee...
I can certainly provide more details. My bad, I should have provided more details.I have a pair of 3845s configured with HSRP. I wanted to test them and make sure the configuration is correct. 3845 #1 ConfigurationInterface gigabitethernet 0/0.200i...
It looks like it was a TFTP issue on my Windows 7 machine using Solarwinds TFTP. I tried using TFTPServer on my Mac and it worked like a charm. Gosh, I forgot how slow the 2522 router runs. What do you guys run for your frame relay router in the la...
