Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
As infrastructure evolves through hybrid cloud adoption, your data center network is challenged to evolve with it. How can your fabric transform a distributed data center into an interconnected multicloud network? How will it be managed, secured and...
After many question on "ip unnumbered" and how the configuration would look, I took a spin on the already released "ip numbered" or "p2p" approach that I posted back in May 2015.For the sake of this example, we are using the following Topology exampl...
VXLAN/EVPN has been release on Nexus 9000 series in early February 2015, followed by Nexus 7000/7700 (F3/M3 Linecard) in Summer and Nexus 5600 later in 2015. Other Cisco platforms like the ASR 9000 and ASR 1000 also support VXLAN with EVPN control-pl...
@lganeva while you are right when it comes to Multi-Site, that you can use IR or Multicast respectively, you are not entirely correct when it comes to different Multicast modes (e.g. PIM Bidir with PIM ASM). There are ways that some different version...
Hi Andy,you can find the supported features and in what release for NX-OS 9000v here Cisco Nexus 9000v Guide - Cisco Nexus 9000v [Cisco Nexus 9000 Series Switches] - CiscoWe are in the NX-OS 7.0(3)-train and not NX-OS 7.3.0. That might have led to so...
Raj,I would go through this link Optimizing Layer 2 DCI with OTV between Multiple VXLAN EVPN Fabrics (Multifabric) White Paper - CiscoIf there is a Layer-2 classic ethernet link or OTV, the requirements and best practices would be the same. I'm not s...
In the LEAF configuration, you have 2 loopback interfaces defined.
You use Loopback 0 as a source of OSPF and BGP. Loopback 1 as the source of VTEP.
Why do you separate them?
You never want your control-plane sessions to be brought down when for exa...
Artem,the "special" SVI for interconnecting the VPC members is to have an alternate path if all uplinks to the Spine fails. This said, this "L3 over peer-link" requires the similar attributes in regards of routing, BUM and mtu as your uplinks to the ...
