Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to forward a selection of ports to two internal IP addresses. The main port is 8080 to internal IP 10.20.16.245.I've stripped down the router config to as basic as possible for testing this out.Open port scanner reports that the port is ...
I am having severe packet loss issues with my WAP321s and Intel wireless adapters, specifically 2200bg, 2200n, and 2230n. I get occasional complete dropouts for over 1 minute at a time, and average of 30% packet loss on a ping test (varies from 10% t...
I have an 1841 router with several WAN interfaces. What I am trying to accomplish is that if the Ethernet 0/1 interface is down, it will route traffic to the backup interface which is Serial 0/1/0.Serial 0/0/0 and 0/0/1 are point to point T1 to a re...
You nailed it Daniel. They had the incorrect default gateway on the DVR. We have multiple default gateways on the network and they assumed the incorrect one when they configured it. Thanks!Alain I do appreciate the assistance as well.
Ran wireshark and I see no traffic on the network to or from the internal (10.20.16.245) IP address. I'm stumped as to why this isn't going through the router.
Alain,Thanks for the response. I am able to communicate from the inside to its private IP with http://10.20.16.245:8080.Externally, from the browser, I am using http://WANPIP:8080 as you also specified.I can run wireshark later today and see if I am...
