Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I'm hoping someone could confirm if a WebRTC participant joins a CMS meeting/space, proxied via Expressway Edge, will that participant consume an Expressway RMS license? I've checked Call types and Licensing in the admin guide but there's no ref...
Hi, have a strange issue with a sx80. All other endpoints in the same subnet and VCS subzone (mx300's, dx80's and sx10..) can place sip tls video calls. The error message on the vcs when the sx80 places and sip tls video call is "temporary unavailabl...
Hi All, we have an sx80 device registered to spark. There's a touch10 device however the room's designed to be controlled from a Crestron panel. The Crestron processor connects to the sx80 fine using a local integrator account and we can place ca...
Hi, I'm trying to check support coverage of a clients virtual vcs using the coverage tool - https://cway.cisco.com/sncheck/, however it doesn't recognize the serial number, also tried different virtual VCS and it doesn't find them, as they were migra...
Hi All, is it possible to change the operation vlan on a TX9000? It's patched into a access switchport but for some reason the uplink port on the primary codec is using vlan114 which i believe is stopping it from reaching it's gateway, layer 2 is fi...
Hi, does anyone know if the web engine on the webex room devices is ready to join zoom meetings using webrtc? I plan on testing this next week, using macros and ui customisation, I’m thinking of adding a button to the touch 10 which prompts user for ...
I'm planing to migrate from vcs-c&e appliance to virtual Expressway-C&E. My ccw build currently consists of the following R-UCL-UCM-UPG-K9 with 20x MIG-VCS-UCM-TPRR-VCS2EXPWY-E-K9 with 20x CON-ECMU-LICEXPRMMy current VCS-C appliance doesn't have the ...
I'm planing to migrate from vcs-c&e appliance to virtual Expressway-C&E. My ccw build currently consists of the following R-UCL-UCM-UPG-K9 with 20x MIG-VCS-UCM-TPRR-VCS2EXPWY-E-K9 with 20x CON-ECMU-LICEXPRM My current VCS-C appliance doesn't have the...
It turns out, after quite a bit of head scratching, having multistream enabled on the dual display endpoints was the cause this sip tls issue when registered to VCS running old software version (8.5.1). CMS release notes states newer vcs/expressway s...
