Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I have got a test ASA setup to authenticate Anyconnect on iOS devices using certificates (objective is to have an on-demand setup with zero user intervention).
While it works perfectily when the client is a Windows compiter running Anyconnec...
Hi,
We have the same issue here. ISE 2.1 complains about too many accounting messages from NAS for both the WLC's (version >8) and the wired switches (3750x for instance running 15.0(2)SE6 or 15.0(2)SE7).
On the WLC settings we do have the inter...
I finally got it working thanks to another post :
https://supportforums.cisco.com/discussion/12674881/3850-0307-device-sensor-accounting-support
I confirm it works as expected, ISE is now receiving radius accounting with CDP inputs.
regards
3850 is different from 3750 when it comes to dot1x.
you now need to have your authentication events/actions defined in class-map referenced with a service policy attached to the user port.
just tried with 03.06.06.E.152-2.E6.bin and the same issue is still there ...
could Cisco have a look on this ? we cant buy 3750x anymore ... would be cool if 3850 could at least provide the features !
I could not find the procedure for patch 1 upgrade, wondering if it changed after 2.X.
Is it the same as before ?
Upload patch to the repository
Adminitration -> Upgrade
