Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The users have been complaining about the network is slowness , after checking each lay2 switches, I found under each vlan the no ip route-cache is configured, the module is 2960, I am not sure if the command is there by default or configured manuall...
I am configuring the eigrp under the 3750X with IOS c3750e-universalk9-mz.150-2.SE4.bin, the 'eigrp stub connected summary' is there by default, I tried to NO it, but I could not, what is the purpose of this command by default out thereThanks
HiWe just purchased new 3750X and got the Cisco license key from the vendor, is there anything I need to do with this Cisco license key? Like software activation?Thanks
We have 2 switches connected by ether channel link with access port , no trunk link, is that ok to turn off the spanning-tree, by the way only 2 switches, no moreSent from Cisco Technical Support iPhone App
Thanks Richardso this command is not related to any layer2 devices, any idea what do those layer2 switches ports manage to send packets, guess I should say frame, layer3 is using process, fast and cef, what about layer2
The users who are complaining are at call center, theirs PCs are connecting to cisco ip phone, also the 2960 POE switches are 100M port, not G port, and there is only one cable used for trunk (the trunk port is Giga), by the way , if I change the 100...
Hi PeterThanks and don't be sorry, actually it is replacement of existing 3560G, sometimes it is not our decision to make, though I strongly recommended to use router for WAN device, if the company won't pay guess they might need to do some redistrib...
