I have Cisco 3945 with C3900-SPE150/K9, version 15.1(2)T5 exhibiting identical symptoms. PPP PAP authentication is requested, debug radius shows RADIUS: User-Name [1] 21 "nas-port:0/0/0/64/0"Using a Cisco 2811 instead of the ...
Well Richard. After all that, it seems the particular IOS file may have got corrupted. Had a problem after FTP'ing it over and loading onto a test router, it failed verification. Downloaded a different copy and all ok, no problems running the policy ...
Thanks Rick
I have the image now, but can't run it on GNS3 :(
So over the next few days I'll club together some routers and set it up, and let you know.
David
The normal routing logic would select WAN2 for the next-hop as it has the higher LP. So PBR forces LP on WAN1 to be higher for the next-hop, only for traffic matching the ACL. The second statement in the route map ensures all other traffic is let thr...
Thanks Rick
PBR worked ok with a physical LAN interface before changing to dot1q. To be honest I can't be certain if it ever worked with dot1q, it was July last year and I can't remember ever re-testing it again (its at a remote customer site).
It wo...
