About infralight

infralight · 09-13-2013

Hi allThere's a problem with calls from SIP domain to ISDN, calling number field missed in q931 setup messageCall is ok, but ISDN subscribers dont receive any clid at all.Network SchemeNaumen CC ------ AS5350 ------- PBXDebug#debug ccsi messINVITE si...

infralight · 09-18-2013

Thanks a lot for response, Danieleunfortunately i cannot definitely say if it is smth wrong with IOS (it's truly old as time) because we need particular image to work with h323 Hughes Network devices, this AS5350 is production device and I havent mor...

infralight · 09-17-2013

Also debug isdn standart outputSep 17 11:09:16.822: ISDN Se3/1:15 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x6A8BSep 17 11:09:17.226: ISDN Se3/1:15 EVENTd: process_pri_call: call id 0xACCF, number 369, speed 0, call type VOICE, redial No, CSM call N...

infralight · 09-17-2013

Field "From:" is present in all SIP messages that cisco receives.I've just known that NCC ver 6. doesn't use nor RPID neither P-Asserted ID, only From to send caller information.I called IDSN subscriber from testing asterisk PBX with sendrpid=yesINVI...

infralight · 09-16-2013

Thnx for response!What do you mean by saying full debug, logging trap 7?There are many simultaneous calls on this device, so i'm afraid a bit.I may be mistaken but RPID and P-Asserted ID are replacing one another, arent they?According a manual, Naume...

Member Since	‎09-13-2013 03:38 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	5

User Statistics

User Activity

[AS5350] SIP to ISDN, no calling number field

Re: [AS5350] SIP to ISDN, no calling number field

Re: [AS5350] SIP to ISDN, no calling number field

Re: [AS5350] SIP to ISDN, no calling number field

Re: [AS5350] SIP to ISDN, no calling number field