Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We need to authenticate many users via an external captive portal, but without RADIUS/LDAP etc, so using Meraki Cloud Authentication:Is there a limit, on how many devices we can have authenticate against a pre-configured Meraki guest user (configured...
If you have 5000 networks, and you want to apply a custom group policy to some clients across your org, how can this be achieved without creating 5000 group policies (one per network) and mapping the client to each network's created group policy?Basi...
Since 12/13 April we've seen an issue across our customer estate (both In Europe and Americas) where the Meraki Cloud RADIUS client has stopped sending us Accounting Interim and Stop packets. We do get the Start packet, however. This is for captive p...
What is the best way to export (dump) a list of all AP's on a 9800 controller?Is it just show ap summary ?There are several thousand AP's and ideally I want to get an export in CSV format.I plan to write a script to export and format as required.Than...
Hi All We have Webex Teams, Expressway E/C (using MRA), CUCM and are using Webex Calling for our employees (Unified CM Calling option) Expressway X14.0.1CUCM 11.5.1 We have set up SSO (Single Sign On) in CUCM and Expressway-C with our identity prov...
Thanks.As per above then, is there a limit of clients? Meraki's group policy page says 3,000 for manually applied, however I've been able to add 70,000 without error...
I don't follow.1. You create a template and add all your networks to it.2. You create a group policy inside the template.3. You assign clients to the group policy.As the group policy is mapped to the template, isn't any client added to the group poli...
So if I apply all networks in the org to a template, and add the clients to a group policy defined on the template, the clients will get assigned the policy on ALL networks mapped to the template?
Thanks @Raphletourn and @alessandrodematos.I thought as much.I read the same about the 3,000 limit for group policies. I've tested, via API, adding tends of thousands of client MACs and it's accepted it just fine, so now not so sure:If using network ...
Yeah, got a ticket open but their support not yet finding anything, even though it has to be 100% the Meraki RADIUS cloud as it is that which sends the RADIUS packets out (not the AP or from customer premise)It's not the specific RADIUS proxy option,...
