Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I need to deploy a Private VLAN and a couple of standard VLANs on a switch, which has IOSXE 16.12.02; the pVLAN (the Primary one) and the standard VLANs all need to be trunked out of the same port that connects to a router.
I've done some researc...
Hi All,1- my problem is to understand if a vrf can be used on a router to learn routes from a second vrf, and propagate them to a 3rd one. Here is an example:PE1ip vrf Cust-A rd 100:1 route-target export 100:1 route-target import 100:1ip vrf CoreVRF ...
Hi All,I have got a fairly complex issue, with a particular requirement.I have a BGP/MPLS/VPN Core Network, with Core Routers CR0, CR1,,...,CR6.A few vrfs are built on it; let's focus on vrf RED (that I will also call "Customer vrf").A Customer route...
Hi All, I have a few Q’s about BGP/MPLS/VPN that I haven’t found answer on, on any text or community. As they are all related, I think it's better to open a single thread for them all. 1- consider this setup on PE1 - PE2 (the objective here is for ...
Hi Lei,honestly I didn't think of PfR, and it could be a good idea; the problem is that I would need to configure it network-wise, with MC, BRs etc, and it's not really feasible in my network; I was looking for some more simple solution, to configure...
Hi Harold,thank you for your answers; they are all clear to me, except #3.When you say: <I think this just a partial configuration to illustrate the export map. The "route-target export" is optional if you use an "export map">I am confused, because f...
